How to use self-tapping screws
If you are someone who is new to self-tapping screws or often avoid them because you think they are difficult –don’t do this to yourself! They are actually very convenient and easy, once you learn the procedure of using these screws. Their versatility and combined strength not only allow your equipment to last longer but guarantee a home for what it is worth. For example, if you decide to use a nail rather than a screw for a heavy wall decoration over 15 pounds, there is an 80% chance it will come out crashing onto the floor. Indeed, this is something we wished we hadn’t done in the first place. Not to worry though, we have come up with a clever tutorial on how to use self-tapping screws.
1. Based on what we taught you earlier about head types, and size – you need to take into account your needed materials. For example, chose a head shape which compliments what you are trying to do. Flat heads should be used for furniture while pans are meant for metal work or stronger material. Depth is always important too, so measure carefully.
2. You will need a few self-tapping screws or a few hundred, depending on your project. Gather a drill, and a drill bit. All these can be found in hardware stores or online.
3. Now drill into a wall, or the material that you intend to use as support. This wall is called a pilot hole and is used to allow you to easily sink in the screw, rather than twisting and turning. First make your pilot hole, then you are ready to go!
4. You can also use an electric screw driver if you have a larger project as well. Let your self-tapping screw spin onto the surface area until it is fully inserted. If you are going through strong material which isn’t easy to penetrate, you may want to stick to a flat head or use a fine edged screw.
5. Now tighten your screw onto the wood, metal object, or other material. Make sure you never over tighten it though because many times before – this has backfired on people. This could easily cause the equipment to become damaged or deformed since these screws are very sharp.
